Gloved healthcare worker placing microfiber pads in a Rubbermaid HYGEN cleaning bucket in a hospital
Gloved healthcare worker placing microfiber pads in a Rubbermaid HYGEN cleaning bucket in a hospital

MEDICAL, SAFETY & REGULATED PRODUCTS

WHEN THE SPECIFICATION ISN’T OPTIONAL.

WHEN THE SPECIFICATION ISN’T OPTIONAL.

PERMANENT INFORMATION. WHERE IT MATTERS MOST.

Permanent warnings, instructions and identification for products where safety, regulatory requirements and long-term readability matter.

Permanent warnings, instructions and identification for products where safety, regulatory requirements and long-term readability matter.

REGULATED APPLICATIONS

SOME GRAPHICS SIMPLY CAN NEVER FAIL.

SOME GRAPHICS SIMPLY CAN NEVER FAIL.

IMPORTANT INFORMATION BELONGS WITH THE PRODUCT.

IMPORTANT INFORMATION BELONGS WITH THE PRODUCT.

A MISSING LOGO IS A BRAND PROBLEM. A MISSING WARNING CAN BECOME A SAFETY PROBLEM.

Different products face different marking requirements. The information needs to remain visible, readable and correctly associated with the product—through cleaning, handling and the intended service life.

Red sharps and clinical waste containers with integrated biohazard graphics

01

MEDICAL & HAZARDOUS WASTE

Hazard symbols, handling instructions and identification on containers exposed to cleaning, chemicals and repeated handling.

02

CHEMICAL & POISON MARKINGS

Warnings and identification for applicable chemical containers, hazardous-material packaging and related products.

03

PRESSURE & EQUIPMENT HAZARDS

Warnings and operating information for equipment where pressure or operating conditions create safety requirements.

04

PROTECTIVE CASES & PACKAGING

Identification, handling instructions and specified markings for rugged equipment cases and transport packaging.

REGULATIONS & STANDARDS

BUILT AROUND THE REQUIREMENT. BACKED BY EVIDENCE.

BUILT AROUND THE REQUIREMENT. BACKED BY EVIDENCE.

DEFINE IT BEFORE YOU MOLD IT.

DEFINE IT BEFORE YOU MOLD IT.

Regulated products can require specific wording, symbols, placement, contrast, durability and identification methods. MIGS works with product teams and rotomolders to turn those requirements into graphics that can be manufactured consistently and evaluated against the applicable specification.

THE GRAPHIC SPECIFICATION

SIX DETAILS TO RESOLVE.

01

WORDING + SYMBOLS

The exact information the product must carry.

02

PLACEMENT + CONTRAST

Where it is seen—and how it is read.

03

MATERIAL + PROCESS

A graphic construction suited to the plastic.

04

SERVICE CONDITIONS

Cleaning, chemicals, handling and exposure.

05

IDENTIFICATION

The data that stays connected to the product.

06

VALIDATION

Test methods and acceptance criteria.

INFORMATION PEOPLE DEPEND ON

GRAPHICS ARE MORE THAN DECORATION.

GRAPHICS ARE MORE THAN DECORATION.

IDENTIFY IT. HANDLE IT. USE IT CORRECTLY.

IDENTIFY IT. HANDLE IT. USE IT CORRECTLY.

Orange EMS equipment case with realistic molded shell, latches and permanent identification graphics

01

RECOGNIZE THE CONTENTS.

Product identity and hazard symbols help people distinguish what they are handling.

02

UNDERSTAND THE REQUIREMENT.

Warnings and instructions communicate the information needed at the point of use.

03

KEEP THE CONNECTION.

Asset IDs and codes connect equipment or packaging to the information behind it.

THE MIGS ADVANTAGE

BUILT INTO PRODUCTS YOU ALREADY KNOW.

John DeereYETIBayerYamahaBOSS SnowplowLifetimeOld TownFisherJackson KayakSalvation ArmyCaterpillarBass Pro ShopsBad Boy MowersAcerbis

TESTED PERFORMANCE

THE TEST REPORT MATTERS MORE THAN THE PROMISE.

THE TEST REPORT MATTERS MORE THAN THE PROMISE.

MATCH THE EVIDENCE TO THE APPLICATION.

MATCH THE EVIDENCE TO THE APPLICATION.

Start with the actual material, graphic construction and service conditions. Review the relevant documentation, then establish the testing needed for the finished product.

CHEMICAL CONTACT

ABRASION

UV + WEATHER

CLEANING + WASHDOWN

TECHNICAL DOCUMENTATION

2025 PGC TEST DATA REPORT

Review the documented test conditions and results for the evaluated graphic construction.

TECHNICAL DOCUMENTATION

TABER ABRASION TESTING

Review the Nano-Shield abrasion report and discuss its relevance to your application.

Cleaning and washdown protocols, chemical concentrations and exposure times belong in the specification too. Ask MIGS which evidence applies to your product.

DESIGN CENTER

START WITH THE SPECIFICATION.

START WITH THE SPECIFICATION.

RESOLVE THE GRAPHIC BEFORE PRODUCTION.

RESOLVE THE GRAPHIC BEFORE PRODUCTION.

The product owner defines the safety or identification requirement. The rotomolder has to manufacture it correctly. MIGS helps both teams work through the details together.

01

PRODUCT SPECIFICATION

Bring the marking requirement, material, operating conditions and intended service life.

02

GRAPHIC PLACEMENT

Review artwork, CAD geometry, viewing angles, available surface and manufacturing approach.

03

FINISHED PART

Confirm the production requirements and tests that support the finished product.

START WITH THE REQUIREMENT

What Standard Does Your Product Need to Meet?

Bring us the product, drawing, marking requirement or applicable specification. We’ll help evaluate the graphic construction, placement, manufacturing approach and supporting validation.

This form is not connected yet. Please contact MIGS directly.

We couldn't send that request. Please try again or contact MIGS directly.

Thanks — we've got it.

Someone from our engineering team will review your project and follow up shortly.

START WITH THE REQUIREMENT

What Standard Does Your Product Need to Meet?

Bring us the product, drawing, marking requirement or applicable specification. We’ll help evaluate the graphic construction, placement, manufacturing approach and supporting validation.

This form is not connected yet. Please contact MIGS directly.

We couldn't send that request. Please try again or contact MIGS directly.

Thanks — we've got it.

Someone from our engineering team will review your project and follow up shortly.

START WITH THE REQUIREMENT

What Standard Does Your Product Need to Meet?

Bring us the product, drawing, marking requirement or applicable specification. We’ll help evaluate the graphic construction, placement, manufacturing approach and supporting validation.

This form is not connected yet. Please contact MIGS directly.

We couldn't send that request. Please try again or contact MIGS directly.

Thanks — we've got it.

Someone from our engineering team will review your project and follow up shortly.