Mold-In Graphics Technology

Mold-In Graphics Technology

Permanent Graphics.
Two Ways to Build Them into the Product.

Permanent Graphics.
Two Ways to Build Them into the Product.

MIGS offers two permanent graphic solutions for rotomolded polyolefins.

Mold-In integrates graphics during molding, while Mold-On uses controlled heat after production. Both deliver lasting branding, instructions and identification without traditional inks or adhesives.

MIGS offers two permanent graphic solutions for rotomolded polyolefins.

Mold-In integrates graphics during molding, while Mold-On uses controlled heat after production. Both deliver lasting branding, instructions and identification without traditional inks or adhesives.

Customer graphics integrated into molded plastic: Old Town, Pepsi, Lifetime, YETI and other brands.

Plastic Does Not Make Labeling Easy

Polyethylene and other polyolefins are excellent materials for durable products. They resist moisture, chemicals and everyday wear. Those same properties also make them difficult to label. Traditional labels, inks and adhesives sit on the surface of a material that naturally resists attachment. Temperature changes, UV exposure, abrasion, chemicals and repeated handling add more stress over time. MIGS takes a different approach. Our graphics are engineered for polyolefin materials and use heat to become integrated with the product surface. The graphic does not simply need to survive application. It needs to perform through the working life of the product.

Plastic Does Not Make Labeling Easy

Polyethylene and other polyolefins are excellent materials for durable products. They resist moisture, chemicals and everyday wear. Those same properties also make them difficult to label. Traditional labels, inks and adhesives sit on the surface of a material that naturally resists attachment. Temperature changes, UV exposure, abrasion, chemicals and repeated handling add more stress over time. MIGS takes a different approach. Our graphics are engineered for polyolefin materials and use heat to become integrated with the product surface. The graphic does not simply need to survive application. It needs to perform through the working life of the product.

ONE PERMANENT RESULT. TWO PRODUCTION PATHS.

TWO TECHNOLOGIES. DIFFERENT POINTS IN THE PROCESS.

TWO TECHNOLOGIES. DIFFERENT POINTS IN THE PROCESS.

Start with when the graphic enters production. Placement, run size and whether the part already exists help determine the right path.

Permanent Pyranha graphics integrated into a molded kayak.

01 / BEFORE THE PART IS FORMED

MOLD-IN GRAPHICS

Position the graphic inside the mold. As the polyethylene forms, the graphic becomes part of the surface. The finished product leaves the mold with its identity already in place.

WHEN IT MAKES SENSE

Repeat production • Consistent placement • Graphics planned before molding • No secondary labeling • Normal production integration

HOW IT WORKS

01

Prepare the mold surface.

02

Position the graphic inside the mold.

03

Run the rotational molding cycle.

04

Release the part with its graphic integrated.

Permanent graphics on a yellow molded marine marker.

02 / AFTER THE PART IS COMPLETE

MOLD-ON GRAPHICS

Apply the graphic to the finished part using controlled heat and pressure. Add permanent identity after molding without modifying the mold or investing in dedicated application machinery.

WHEN IT MAKES SENSE

Small runs • Custom products • Difficult in-mold placement • Multiple versions • Prototypes • Aftermarket • Products in service

HOW IT WORKS

01

Prepare the finished product surface.

02

Position the graphic on the part.

03

Apply controlled heat and pressure.

04

Inspect the permanent finished graphic.

BEFORE MOLDING OR AFTER. BUILT TO STAY WITH THE PRODUCT.

FUSED Into Products You Already Know

Coca-ColaNFLYETIORBISAmazonRubbermaidNEFABU.S. Air ForceCHEPChevroletCorvetteDECKEDFordGMCHondaJohn DeereKrogerMac ToolsMagnaMcDonald'sMountain DewOTTOPepsiSaeplast AmericaSafewayToroTriEndaU.S. ArmyU.S. MarinesU.S. NavyWalmartWhirlpool

BUILT AROUND YOUR PRODUCTION FLOOR

Better graphics without
making production harder.

Permanent graphics only create value when they work reliably on your floor. MIGS supports the way rotomolders already operate—from the first application to a process your team can repeat.

MOLD-IN · WITHIN THE MOLDING CYCLEMOLD-ON · FLEXIBILITY AFTER MOLDING
01MATCH + PROVE

Get the setup right.

  • Graphic and material matching
  • Application testing
  • Placement guidance
02TRAIN + DOCUMENT

Make it repeatable.

  • Operator training
  • Process documentation
  • Inspection standards
03SUPPORT + IMPROVE

Keep production moving.

  • Troubleshooting
  • Ongoing application support

A better graphic.
A process operators can repeat.

Material Compatibility Comes First

Material Compatibility Comes First

Resins, additives, pigments and mold release agents can affect graphic performance. MIGS evaluates the material and molding process to match the right graphic solution for consistent production results.

Resins, additives, pigments and mold release agents can affect graphic performance. MIGS evaluates the material and molding process to match the right graphic solution for consistent production results.

BUILT TO LAST

Designed for the Life of the Product

Explore performance across:

UV + Weather

UV and weather exposure

UV and weather exposure

Abrasion + Impact

Abrasion and impact

Abrasion and impact

Chemicals

Chemicals and cleaning

Chemicals and cleaning

Temperature

Temperature changes

Temperature changes

Repeated Handling

Repeated handling

Repeated handling

Expected Product Life

Long-term readability

Long-term readability

Product identification

Product identification

Product identification

A graphic may look good when the product leaves the mold. Performance is determined by what happens next. Rotomolded products live outside, move through worksites, encounter chemicals and endure years of abrasion, impact and handling. Branding must remain recognizable. Instructions readable. Safety and identification graphics must keep doing their jobs. MIGS graphics are designed for the product’s environment and expected life, not just the moment of application.

DEFINE SUCCESS BEFORE PRODUCTION

Built to the right specification.

A cooler, road barrier and chemical tank face different demands. Specify the graphic for the product, its service life and the consequences of failure.

GRAPHIC PERFORMANCE SPECIFICATIONPRODUCT → ENVIRONMENT → VALIDATION
01

Define the product

WHAT ARE WE BUILDING?
  • Product material and formulation
  • Mold-In or Mold-On application
  • Graphic location and geometry
02

Map its working life

WHAT MUST IT WITHSTAND?
  • Expected service environment
  • UV, abrasion and chemical exposure
  • Cleaning and washdown requirements
03

Agree on the proof

HOW WILL WE KNOW IT WORKS?
  • Readability and appearance requirements
  • Test methods and acceptance criteria
  • Production inspection standards
One shared definition
of success.
EngineeringQualityPurchasingRotomolder

Build a new graphic specification or adapt an existing company or industry standard. Give every team the same requirements to evaluate the finished product.

START WITH THE PRODUCT

Better Products Start with the Right Graphic Process.

Whether the graphic goes inside the mold or onto the finished part, the decision should be made around how the product is manufactured, used and expected to perform. Bring us the product, material, graphic requirement and production environment. We will help determine the right MIGS technology and establish the path to production.

This form is not connected yet. Please contact MIGS directly.

We couldn't send that request. Please try again or contact MIGS directly.

Thanks — we've got it.

Someone from our engineering team will review your project and follow up shortly.

START WITH THE PRODUCT

Better Products Start with the Right Graphic Process.

Whether the graphic goes inside the mold or onto the finished part, the decision should be made around how the product is manufactured, used and expected to perform. Bring us the product, material, graphic requirement and production environment. We will help determine the right MIGS technology and establish the path to production.

This form is not connected yet. Please contact MIGS directly.

We couldn't send that request. Please try again or contact MIGS directly.

Thanks — we've got it.

Someone from our engineering team will review your project and follow up shortly.

START WITH THE PRODUCT

Better Products Start with the Right Graphic Process.

Whether the graphic goes inside the mold or onto the finished part, the decision should be made around how the product is manufactured, used and expected to perform. Bring us the product, material, graphic requirement and production environment. We will help determine the right MIGS technology and establish the path to production.

This form is not connected yet. Please contact MIGS directly.

We couldn't send that request. Please try again or contact MIGS directly.

Thanks — we've got it.

Someone from our engineering team will review your project and follow up shortly.