Gloved hands loading polymer powder into circular tooling on a rotational molding carrier

PERMANENT GRAPHICS 101

Good Graphics Start Before the Powder Goes In.

Permanent graphics for rotational molding aren’t one process or one product. The right approach depends on when the graphic is applied, the resin and additives being molded, mold condition, graphic requirements, production process, and what the finished part will experience.

Gloved hands loading polymer powder into circular tooling on a rotational molding carrier

PERMANENT GRAPHICS 101

Good Graphics Start Before the Powder Goes In.

Permanent graphics for rotational molding aren’t one process or one product. The right approach depends on when the graphic is applied, the resin and additives being molded, mold condition, graphic requirements, production process, and what the finished part will experience.

Gloved hands loading polymer powder into circular tooling on a rotational molding carrier

PERMANENT GRAPHICS 101

Good Graphics Start Before the Powder Goes In.

Permanent graphics for rotational molding aren’t one process or one product. The right approach depends on when the graphic is applied, the resin and additives being molded, mold condition, graphic requirements, production process, and what the finished part will experience.

ONE PERMANENT RESULT. TWO PRODUCTION PATHS.

TWO TECHNOLOGIES. DIFFERENT POINTS IN THE PROCESS.

Start with when the graphic enters production. Placement, run size and whether the part already exists help determine the right path.

Permanent Pyranha graphics integrated into a molded kayak.

01 / BEFORE THE PART IS FORMED

MOLD-IN GRAPHICS

Position the graphic inside the mold. As the polyethylene forms, the graphic becomes part of the surface. The finished product leaves the mold with its identity already in place.

WHEN IT MAKES SENSE

Repeat production • Consistent placement • Graphics planned before molding • No secondary labeling • Normal production integration

HOW IT WORKS

01

Prepare the mold surface.

02

Position the graphic inside the mold.

03

Run the rotational molding cycle.

04

Release the part with its graphic integrated.

Permanent graphics on a yellow molded marine marker.

02 / AFTER THE PART IS COMPLETE

MOLD-ON GRAPHICS

Apply the graphic to the finished part using controlled heat and pressure. Add permanent identity after molding without modifying the mold or investing in dedicated application machinery.

WHEN IT MAKES SENSE

Small runs • Custom products • Difficult in-mold placement • Multiple versions • Prototypes • Aftermarket • Products in service

HOW IT WORKS

01

Prepare the finished product surface.

02

Position the graphic on the part.

03

Apply controlled heat and pressure.

04

Inspect the permanent finished graphic.

BEFORE MOLDING OR AFTER. BUILT TO STAY WITH THE PRODUCT.

WHICH ONE SHOULD I USE?

START WITH YOUR PRODUCTION REALITY.

Neither approach is automatically better. Work through these three decisions with your part and production team.

01

WHEN DOES THE GRAPHIC ENTER?

WHEN DOES THE GRAPHIC ENTER?

MOLD-IN

Before the part is molded

Plan the graphic into the molding cycle.

MOLD-ON

The part already exists

Add permanent identity after molding.

02

HOW OFTEN WILL IT CHANGE?

HOW OFTEN WILL IT CHANGE?

MOLD-IN

Repeat production

Coordinate consistent graphics and placement with molding.

MOLD-ON

Flexible requirements

Consider post-mold application for changing graphics or finished-part needs.

03

WHERE DOES IT FIT THE WORKFLOW?

WHERE DOES IT FIT THE WORKFLOW?

MOLD-IN

In the mold

Prepare the mold and position the graphic before the cycle.

MOLD-ON

After molding

Plan the graphic application as a separate production step.

Start with the part. We’ll help determine the path.

Blue, black and white polymer resin beads representing material formulation.

THE MATERIAL MATTERS

“IT’S POLYETHYLENE” IS ONLY THE START.

Two polyethylene formulations can behave differently. The base resin is only one part of what you are actually molding.

PE

BASE RESIN

+

COLOR

Pigments and color package

UV + ADDITIVES

Stabilizers, fillers and specialty additives

RELEASE

Internal release and processing aids

REGRIND

Recycled or reprocessed content

THE ACTUAL MATERIAL. THE ACTUAL REQUIREMENT.

Ingredients that help the product do its job can also influence graphic compatibility. Specify the formulation—not just the resin family on the data sheet.

THE FORMULATION

Base resin • Color package • Internal release • Additives and fillers • Recycled/regrind content

THE PROCESS

Molding conditions and the surface requirements of the finished part.

THE USE

Expected environment and the performance the graphic must deliver.

A FLUID kayak navigating whitewater: impact, water and repeated handling in real use.
A FLUID kayak navigating whitewater: impact, water and repeated handling in real use.

PERMANENT DOESN’T MEAN INDESTRUCTIBLE

DEFINE THE LIFE. THEN CHOOSE THE TEST.

DEFINE THE LIFE. THEN CHOOSE THE TEST.

DEFINE THE LIFE. THEN CHOOSE THE TEST.

A kayak and a medical cart don’t live the same life. Neither does a chemical tank and a playground component.

Start with the conditions the product will actually encounter—and how long the graphic needs to remain useful.

BUILD THE TEST PLAN AROUND REAL USE

UV + Weather

UV + WEATHER

Sunlight and outdoor exposure

Abrasion + Impact

ABRASION + IMPACT

Contact, scraping and knocks

Chemicals

CHEMICALS

The substances it will encounter

Cleaning + Sanitation

CLEANING + SANITATION

Products, methods and frequency

Water + Moisture

WATER + MOISTURE

Wet conditions and immersion

Repeated Handling

REPEATED HANDLING

Daily use, movement and contact

Temperature

TEMPERATURE

The expected operating range

Expected Product Life

EXPECTED PRODUCT LIFE

The duration of the requirement

DON’T TEST FOR “DURABILITY.” TEST FOR THE LIFE THE PRODUCT WILL LIVE.

GRAPHICS DO DIFFERENT JOBS

Start With What Has to Stay on the Product.

Permanent graphics aren’t only decoration.

BRANDING:

Brand marks, logos, product graphics, and appearance.

WARNINGS + SAFETY:

Information that needs to remain visible through product use.

INSTRUCTIONS:

Operating, directional, service, and use information.

IDENTIFICATION:

Part numbers, asset identification, serial information, and ownership.

VISIBILITY:

Reflective, luminescent, specialty color, and other functional graphics.

DESIGN:

Color, metallic effects, authentication, and specialty visual treatments.

GRAPHICS DO DIFFERENT JOBS

Start With What Has to Stay on the Product.

Permanent graphics aren’t only decoration.

BRANDING:

Brand marks, logos, product graphics, and appearance.

WARNINGS + SAFETY:

Information that needs to remain visible through product use.

INSTRUCTIONS:

Operating, directional, service, and use information.

IDENTIFICATION:

Part numbers, asset identification, serial information, and ownership.

VISIBILITY:

Reflective, luminescent, specialty color, and other functional graphics.

DESIGN:

Color, metallic effects, authentication, and specialty visual treatments.

Blue CAD wireframe kayak illustrating graphic planning during product design.

DESIGN EARLY

GIVE THE GRAPHIC A PLACE IN THE DESIGN.

GIVE THE GRAPHIC A PLACE IN THE DESIGN.

GIVE THE GRAPHIC A PLACE IN THE DESIGN.

Graphics are often one of the last decisions. Earlier is better.

Location, geometry, resin, texture and production sequence can all affect the options. Bring them into the conversation while there is still room to solve them together.

PLACEMENT

Where will the graphic sit? Consider visibility, geometry and surface texture.

MATERIAL

What will it be molded from? Work with the actual resin formulation.

PRODUCTION

When will it be applied? Plan the mold surface, sequence and performance requirement.

Already have a finished part? That’s fine too. Start with what you have.

LET’S START WITH YOUR PRODUCT

Got a Part? Start There.

Send us the part, resin information, graphic requirement, production process, or a photo of the problem you’re trying to solve. We’ll help figure out what matters.

This form is not connected yet. Please contact MIGS directly.

We couldn't send that request. Please try again or contact MIGS directly.

Thanks — we've got it.

Someone from our engineering team will review your project and follow up shortly.

LET’S START WITH YOUR PRODUCT

Got a Part? Start There.

Send us the part, resin information, graphic requirement, production process, or a photo of the problem you’re trying to solve. We’ll help figure out what matters.

This form is not connected yet. Please contact MIGS directly.

We couldn't send that request. Please try again or contact MIGS directly.

Thanks — we've got it.

Someone from our engineering team will review your project and follow up shortly.

LET’S START WITH YOUR PRODUCT

Got a Part? Start There.

Send us the part, resin information, graphic requirement, production process, or a photo of the problem you’re trying to solve. We’ll help figure out what matters.

This form is not connected yet. Please contact MIGS directly.

We couldn't send that request. Please try again or contact MIGS directly.

Thanks — we've got it.

Someone from our engineering team will review your project and follow up shortly.