Orange and white connected REMCON rotomolded barriers with permanent graphics
Orange and white connected REMCON rotomolded barriers with permanent graphics
Orange and white connected REMCON rotomolded barriers with permanent graphics

THE MIGS ADVANTAGE

Better Products Deserve Better Graphics.

For more than 40 years, MIGS has helped rotomolders build permanent branding, instructions and product features into the products they make.

THE MIGS ADVANTAGE

Better Products Deserve Better Graphics.

For more than 40 years, MIGS has helped rotomolders build permanent branding, instructions and product features into the products they make.

THE MIGS ADVANTAGE

Better Products Deserve Better Graphics.

For more than 40 years, MIGS has helped rotomolders build permanent branding, instructions and product features into the products they make.

AFTER YEARS IN SERVICE

The product lasts. Does the graphic?

Built to last. Graphics included.

Most graphics look good on day one. Repeated washing, abrasion and handling reveal the difference over time.

SURFACE-APPLIED GRAPHICS

TRADITIONAL SURFACE GRAPHICS

Wear reaches the message.

As the surface graphic wears, branding and identification become harder to read.

SURFACE WEAR → LOST INFORMATION

MIGS PERMANENT GRAPHICS

PERMANENT INTEGRATED GRAPHICS

The crate wears. Identity stays.

The crate can show years of handling while its integrated branding and identification remain recognizable.

PRODUCT WEAR → IDENTITY RETAINED

TWO APPLICATION METHODS

One permanent result. Two production paths.

One permanent result. Two production paths.

Choose the application method around your product, production volume and need for flexibility.

Mold-In Graphics on a finished molded product

01 / DURING MOLDING

Mold-In Graphics

Position the graphic in the mold. As the part forms, the graphic becomes part of its surface.

WHEN IT MAKES SENSE

Repeat production • Consistent placement • Graphics planned into the molding cycle

THE PATH TO PERMANENCE

01 POSITION IN MOLD → 02 MOLD THE PART → 03 RELEASE

Mold-On Graphics on a finished molded product

02 / AFTER MOLDING

Mold-On Graphics

Apply permanent graphics to the finished part using heat. Add flexibility after the molding cycle.

WHEN IT MAKES SENSE

Custom runs • Product updates • Existing products • Flexible placement

THE PATH TO PERMANENCE

01 FINISH THE PART → 02 APPLY WITH HEAT → 03 INSPECT

BUILT FOR ROTOMOLDERS

Better graphics have to work on your floor.

Better graphics have to work on your floor.

Developed around rotational molding—not adapted to it later. MIGS helps make permanent graphics a practical part of getting good products out the door.

01

Start with a workable application.

Samples, placement guidance and application assistance help match the graphic to the product.

02

Make it repeatable.

Operator training and troubleshooting support consistent results as production changes.

03

Bring more to your customers.

Design support and sales resources help turn permanent graphics into better product features.

Built Into Products You Already Know

Coca-ColaNFLYETIORBISAmazonRubbermaidNEFABU.S. Air ForceCHEPChevroletCorvetteDECKEDFordGMCHondaJohn DeereKrogerMac ToolsMagnaMcDonald'sMountain DewOTTOPepsiSaeplast AmericaSafewayToroTriEndaU.S. ArmyU.S. MarinesU.S. NavyWalmartWhirlpool

REAL-WORLD PERFORMANCE

Built to face what the product faces.

Built to face what the product faces.

Sun. Chemicals. Abrasion. Washing. Years of handling. Define the real operating conditions, then validate the graphic against them.

Rotomolded products including an Old Town kayak, YETI cooler, slide, drum and pallet
Make it recognizable.

Make it recognizable.

Branding and decorative graphics that belong with the product.

Keep information useful.

Keep information useful.

Instructions, safety warnings and product information where users need them.

Give every product an identity.

Give every product an identity.

Serial numbers, barcodes and QR codes connect the part to its information.

Permanent retroreflective graphic on a molded utility enclosure in daylightThe same retroreflective graphic illuminated at night

RETROREFLECTIVE GRAPHICS / VISIBILITY WHEN ILLUMINATED

PRODUCT INNOVATION

Give the graphic a bigger job.

Give the graphic a bigger job.

Make a product easier to see, easier to use or harder to imitate. Considering graphics early opens up more than branding.

EXPLORE WHAT THE PRODUCT COULD DO

Retroreflective • Photoluminescent • Thermochromic • Authentication • Metallic • Pearlescent • Prismatic • Color-shifting

DESIGN ASSISTANCE

Better graphics start before production.

Better graphics start before production.

Bring us in while the product is taking shape. We help connect the graphic’s job to the material, the process and the conditions it will face.

01

Define.

Agree on what the graphic must do and how long it must remain useful.

02

Validate.

Match materials and test against the product’s real operating conditions.

03

Integrate.

Plan placement and application around the mold, the operator and the part.

04

Support.

Build repeatable results with training, troubleshooting and practical guidance.

PROVEN IN THE REAL WORLD

40+ Years. Real Products. Real Experience.

From kayaks and playgrounds to equipment built for daily work, the graphic must work with the mold, the operator, the material and the finished product. Explore the applications behind that experience.

PROVEN IN THE REAL WORLD

40+ Years. Real Products. Real Experience.

From kayaks and playgrounds to equipment built for daily work, the graphic must work with the mold, the operator, the material and the finished product. Explore the applications behind that experience.

START WITH THE PRODUCT

What Are You Building?

Tell us about your product, material and production requirements. We’ll help you find the right permanent graphic approach.

This form is not connected yet. Please contact MIGS directly.

We couldn't send that request. Please try again or contact MIGS directly.

Thanks—we've got it.

Someone from our engineering team will review your project and follow up shortly.

START WITH THE PRODUCT

What Are You Building?

Tell us about your product, material and production requirements. We’ll help you find the right permanent graphic approach.

This form is not connected yet. Please contact MIGS directly.

We couldn't send that request. Please try again or contact MIGS directly.

Thanks—we've got it.

Someone from our engineering team will review your project and follow up shortly.

START WITH THE PRODUCT

What Are You Building?

Tell us about your product, material and production requirements. We’ll help you find the right permanent graphic approach.

This form is not connected yet. Please contact MIGS directly.

We couldn't send that request. Please try again or contact MIGS directly.

Thanks—we've got it.

Someone from our engineering team will review your project and follow up shortly.