Mold-In Graphics
Permanent Graphics. Built Into the Rotomolding Process.
Placed inside the mold before production begins, MIGS graphics become part of the product as the part forms, creating permanent branding, instructions and identification without a secondary labeling process.
HOW MOLD-IN GRAPHICS WORK
Built Into the Part During Production
Mold-In Graphics are designed to work within the normal rotational molding cycle.
The graphic is positioned inside the mold before the resin is loaded. As the mold heats and the polyethylene forms against its surface, the graphic integrates into the part. When the mold opens, the permanent graphic is already in place.
No adhesive label application. No post-mold printing. No separate decorating operation.
01
Prepare the mold
The mold surface is cleaned and prepared for consistent placement and transfer.
02
Position the graphic
The graphic is placed in the mold using the application method specified for the product, mold surface and production process.
03
Run the molding cycle
The mold is loaded and the normal rotational molding cycle begins. Heat and pressure integrate the graphic as the part forms.
04
Release the finished part
The completed part leaves the mold with its branding, instructions or identification already built into the surface.
THE MIGS ADVANTAGE
Built Into the Product. Designed Around the Process.
MIGS permanent graphics are designed around the material, manufacturing process and working life of the finished product. Instead of treating the graphic as something added at the end, MIGS considers how it will be made, what it needs to communicate and what it must survive.
PERFORMANCE
Designed for the Life of the Product
A graphic may look perfect when the product leaves the factory. The real test begins when the product enters service.
Rotomolded products are dragged, stacked, cleaned, transported and left outside. They encounter sunlight, water, chemicals, abrasion, impact and constant handling. Traditional labels and surface printing can peel, fade or wear away as those exposures accumulate.
Mold-In Graphics take a different approach. By integrating the graphic into the surface during production, MIGS creates a permanent graphic designed around the material, environment and expected life of the product.
Explore performance in:

Harsh weather

UV exposure

Abrasion and impact

Chemical exposure

Repeated handling
Safety and identification


PRODUCT INNOVATION
Permanent graphics can do more than display a logo or instruction.
MIGS works with product teams to explore color, visibility, authentication and other graphic capabilities that add function or distinction to the product. These options can support safety, brand protection, low-light visibility or a more memorable product experience.
01
BE SEEN.
Reflective and photoluminescent capabilities for visibility.
02
STAND APART.
Pearlescent finishes and distinctive color effects.
03
ADD FUNCTION.
Authentication and graphic features built around the product.

MATERIAL COMPATIBILITY
Rotomolding materials are not all the same.
Resin type, pigmentation, additives, mold-release systems and surface conditions can influence graphic transfer and long-term performance. MIGS evaluates the product material and production environment to help specify the appropriate graphic construction and application process.
Designed for the polyolefins used in rotational molding, including a range of polyethylene formulations.
01
Resin type
Start with the actual polyethylene formulation.
02
Pigmentation
Account for the product’s color system.
03
Additives
Consider what else is in the resin.
04
Mold-release systems
Review the production process and release agents.
05
Surface conditions
Evaluate the surface the graphic will become part of.
PROOF
Permanent performance should be supported by more than appearance. Evaluate the graphic against the conditions the product will actually face.
START WITH LIFE IN SERVICE.
SUNLIGHT
UV exposure
Outdoor exposure over the product’s working life.
CONTACT
Abrasion + handling
Contact, stacking and repeated everyday use.
CHEMICALS
Service exposure
Cleaning agents and chemicals encountered in use.
TEMPERATURE
Changing conditions
The temperatures and conditions the product must face.
METHOD + MATERIAL
What was tested, and how was the graphic evaluated?
CONDITIONS + DURATION
What exposure was applied, and for how long?
OBSERVATIONS + RESULTS
What changed—and what does that mean for your product?
Turn test data into a better product decision.


